Print Method: HDP® Dye-Sublimation / Resin Thermal Transfer
Resolution: 600 dpi (23.6 dots/mm)
Print Ribbon Options: • Full-color with resin black, YMCK*, 750 prints • Full-color with two resin black panels, YMCKK*, 600 print • Full-color with fluorescing and resin black, YMCFK*, 600 print • Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH*, 600 prints • Resin black, K*, 3000 prints
HDP Film Options: Clear, 1500 prints
Print Speed:** Batch Mode: • Up to 230 cards per hour / 16 seconds per card (YMCK* with transfer) • Up to 126 cards per hour / 29 seconds per card (YMCKK* with transfer)
Accepted Standard Card Sizes: CR-80 (3.375”L x 2.125”W / 85.6mmL x 54mmW
Print Area: Over-the-edge on CR-80 cards
Accepted Card Thickness: .030” (30 mil) to .040” (40 mil) / .762mm to 1.01mm
Accepted Card Types: ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, polycarbonate. Note: ABS and PVC cards are not recommended for use within the HDP6600 Lamination Module
Input Card Capacity: 100 cards standard (.030” / .762mm) – Optional Dual input hopper or 200-card input hopper available for a total input capacity of 200 cards
Output Hopper Card Capacity: 200 cards (.030” / .762mm)
Card Cleaning: Replaceable cleaning roller (included with each print ribbon)
Memory: 1 GB RAM
Display: User-friendly, SmartScreen™ Graphical OLED Control Panel
Software Drivers: Windows® 7 / 10 / 11 / Server 2012 / Server 2016 / Server 2019 / Server 2022
Interface: USB 2.0, Ethernet (100 Mbps) with internal print server (IPv4- and IPv6-compatible; with support for SNMPv3)
Encoding Options: Supported smart card and magnetic stripe technologies: 125kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3.
Features:
- Print Method: HDP® Dye-Sublimation / Resin Thermal Transfer
- Resolution: 600 dpi (23.6 dots/mm)
- Print Ribbon Options: • Full-color with resin black, YMCK*, 750 prints • Full-color with two resin black panels, YMCKK*, 600 print • Full-color with fluorescing and resin black, YMCFK*, 600 print • Full-color with resin black and heat seal panel for difficult-to-print surfaces, YMCKH*, 600 prints • Resin black, K*, 3000 prints
- HDP Film Options: Clear, 1500 prints
- Print Speed:** Batch Mode: • Up to 230 cards per hour / 16 seconds per card (YMCK* with transfer) • Up to 126 cards per hour / 29 seconds per card (YMCKK* with transfer)
- Accepted Standard Card Sizes: CR-80 (3.375”L x 2.125”W / 85.6mmL x 54mmW
- Print Area: Over-the-edge on CR-80 cards
- Accepted Card Thickness: .030” (30 mil) to .040” (40 mil) / .762mm to 1.01mm
- Accepted Card Types: ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, polycarbonate. Note: ABS and PVC cards are not recommended for use within the HDP6600 Lamination Module
- Input Card Capacity: 100 cards standard (.030” / .762mm) – Optional Dual input hopper or 200-card input hopper available for a total input capacity of 200 cards
- Output Hopper Card Capacity: 200 cards (.030” / .762mm)
- Card Cleaning: Replaceable cleaning roller (included with each print ribbon)
- Memory: 1 GB RAM
- Display: User-friendly, SmartScreen™ Graphical OLED Control Panel
- Software Drivers: Windows® 7 / 10 / 11 / Server 2012 / Server 2016 / Server 2019 / Server 2022
- Interface: USB 2.0, Ethernet (100 Mbps) with internal print server (IPv4- and IPv6-compatible; with support for SNMPv3)
- Encoding Options: Supported smart card and magnetic stripe technologies: 125kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3.
Leave feedback about this